Boat Trailer Leaf Spring Information:

1. Size: 45x6-5

2. Application: for Boat Trailer

3. Type: Conventional type

5 Pieces Boat Trailer Leaf Spring Supplier Drawing:

Australia Market 5 Pieces Boat Trailer Leaf Spring Supplier Detail Photos:

Boat Trailer Leaf Spring Supplier is one of cells in auto suspension system,the main function is transmiting all force

and monments between wheels and car frame,relax impactive load caused by the road surface and realize vehicle

guidance,makes vhehicles anormal drive.It is a necessary compenent of truck,trailer,special cars and other

vehicles.

   
During the usage,the following maintaining and servcing are necessary.   

1. After drive for a certain mileage,U-bolt of leaf spring should be screwed,in cese of such accidents as malposition

of the leaf spring,aberrancy of the car or the breakage from center hole which can all be caused by the looseing of

the U bolt.   

2. After drive for a certain mileage,eye bushing and pin should be checked and lubricated in time.If bushing is

badly worn,it should be replaced in order to avoid the eye sending out noise.At the same time ,such phenomena

as the distortion of leaf spring and aberrancy of the car caused by the imbalanced wear of the bushing can also be

avoid.   

3. After drive for a certain mileage,the assembly of leaf spring should be replaced in time, and leaf spring of both

sides should be checked to see if there is any disaccord between both sides camber in order to avoid wear of the

bushing can also be avoided.   

4. As for new car or those with newly replaced leaf spring car, U-bolt shoule be checked after every 5000

kilometers’driving to see if there is any loose it loose.During driving,much attention should be paid to some

unusual sound from the chassis,it may be the sign of dislocation of leaf spring or the loose of U-bolt or the

breakage of the leaf spring?

WONDEE Autoparts leaf spring factory was founded in 2002. We have 4 branch plants, 12 production lines and 1

international marketing center with an annual output 200000 tons. We have passed ISO/TS16949 certificate in 2006.

We engage in the production of all kinds of automobile leaf spring, from small pick-up vehicle to heavy duty trucks,

from conventional to parabolic , from OEM to after-market. Thickness from 6mm to 50mm, with from 44.5mm to

125mm. Popular material grade includes SUP7, SUP9, SUP11A.

Usually leaf-time is within 1~2 weeks for common leaf spring; 4~5 weeks for parabolic leaf spring. Meanwhile, we

also supply flat bar for leaf spring and flat bar cutting service.